Built to Endure. Engineered to Adapt.
The ultimate platform for aerial productivity combines a rugged design and simple configurability to work as a solution for a variety of industrial applications. Improvements to the M200 Series V2 enhance intelligent control systems, flight performance, and add flight safety and data security features.
Enjoy a more reliable and stable flight with the new OcuSync 2.0 system, which supports automatic dual frequency band switching ;and extends flight range to up to 8km
When multiple payloads or third-party payloads are installed, users can readjust the drone’s center of gravity in the DJI Pilot app, enhancing flight performance and safety.
The TimeSync system continuously aligns the flight controller, camera, GPS module, RTK module for the M210 RTK V2, as well as payloads or onboard accessories. The position data is fixed to the center of the CMOS for precise geotagging when using DJI payloads.
When the situation calls for unobtrusive drone operations, especially at night, all lights can be completely turned off in the DJI Pilot app.
Safe and Secure
The AES-256 encryption keeps your data transmission secure so you can be sure that your critical information stays safe.
A robust FlightAutonomy system with front, bottom and upper sensors detects and avoids obstacles while enabling precision hovering so that you can fly with confidence.
Equipped with new top and bottom anti-collision beacons, the V2 drones are visible at night or in lowlight conditions, making operation in less than ideal conditions safer.
With a built-in ADS-B receiver, the DJI AirSense technology enhances airspace safety by automatically providing the operator with real-time information about nearby airplanes and helicopters.
The remote controller, drone, payloads, RTK module, and RTK base station, can now be upgraded simultaneously with just 1-click in DJI Pilot or DJI Assistant 2
Dual Battery System
The self-heating battery system allows a maximum flight time of 38 minutes and an operating temperature of -20 to 50C.
Matrice 210 RTK V2 Box Contents
- matrice 210 RTK body 1
- D-RTK 2 Mobile Station 1
- remote controller 1
- crystalsky 7.85″ monitor 1
- crystalsky charging hub 1
- wb37 battery 2
- landing gear 2
- propellers(pair) 4
- intelligent flight battery(TB55) 2
- battery charger 1
- charging hub 1
- power cable 1
- usb-a-a cable 1
- mobile device holder 1
- usb ext cable 1
- remote control strap 1
- 64gb microSD card
- carrying case 1
- screwdriver set 1
- gimbal dampener 3
No payload: M200 V2: 38 minutes, M210 V2: 34 minutes, M210 RTK V2: 33 minutes.
Full payload: M200 V2/M210 V2/M210 RTK V2: 24 minutes.
When using an IN2CH Charging Hub, it takes 2 hours and 24 minutes to fully charge 2 TB55 batteries.
1. To get the best performance of the batteries, it is recommended to mark 2 batteries as a pair before first use and continue using them as a pair (charge and discharge them together).
2. The ideal storage temperature for the batteries is between 22â„ƒ- 30â„ƒ. Do not store in humid places.
3. If not using the batteries for more than 10 days, discharge the batteries to 40%-65% of charge to store, charge and discharge them every 3 months to keep them fresh.
The operating temperature of the TB55 Intelligent Flight Batteries is -20â„ƒ to 50â„ƒ. Please note that flight time will decrease when using in cold environments. It is recommended to preheat the batteries to 15â„ƒ before flight to ensure flight performance
The battery has a capacity of 174.6Wh. Please follow the regulations and guidelines for traveling with these batteries via air.
No, they do not.
When using TB55 Intelligent Flight Batteries: M200 V2: 1.45kg; M210 V2: 1.34kg; M210 RTK V2: 1.23kg.
It takes around 2 hours to fully charge a single WB37 Intelligent Battery that is installed in the remote controller, and around 1 hour and 11 minutes using the WCH2 Charging Hub.
Up to 4 hours of continuous use when not powering a display monitor.
There is a silver ring mark on the monitor mounting bracket on the M200 Series V2 remote controller, and on the back of the bracket there is a USB port.
The operating temperature is -20â„ƒ to 50â„ƒ.
SDI and HDMI.
OcuSync 2.0 transmission.
The actual transmission distance depends on the local communications standards.
Under some common regulatory bodies, examples of the transmission range is as follows:
Please refer to the following table for an explanation of how to properly mount your dual gimbal configuration. Left and right is determined from the perspective of looking directly at the drone from the front.
Right gimbal port: Zenmuse X4S/X5S/X7/XT/XT2/Z30,
Left gimbal port: Zenmuse XT/Z30.
Yes, you can control the gimbal angles of both payloads and take still photos or videos using both.
The upward gimbal port supports the Zenmuse X4S/X5S/X7/XT/XT2/Z30.
Upward gimbal mount: Zenmuse X4S/X5S/X7/XT/XT2/Z30.
Left downward gimbal port: Zenmuse XT/Z30.
No, they cannot.
This function is currently not supported.
Still photography: JPEG/RAW/JPEG+RAW.
The M200 Series V2 drones have new anti-collision beacons on the aircraft shell and at the bottom of the battery compartment. The V2 arm lights are equipped with optical lenses, and the engraving on the body of the drone shows V2.
M200 V2/M210 V2 in P-mode with GPS: vertical: ±0.5m (±0.1m when Downward Vision System enabled). Horizontal: ±1.5m (±0.1m when Downward Vision System enabled).
M210 RTK V2 with RTK enabled on: vertical ±0.1m, horizontal ±0.1m.
IP43, means that the Matrice 200 Series V2 can be protected from objects greater than 1 millimeter, and from water spray less than 60 degrees vertically. The IP43 protection rating can protect the Matrice 200 Series V2 when used in adverse environments with dust particles or light showers.
Note: The protection rating may reduce or fail in case of folded-frame arms, exposed ports as a result of open cover, loose weatherproof shell top plugs, and if the aircraft is broken.
Yes. A 64GB Micro SD card is included.
The performance and accuracy of the RTK functions can be enhanced with real-time differential correction using the DJI D-RTK2 High Precision GNSS Mobile Station For Matrice Series, which can be purchased separately.
Yes, this means location data can be corrected after the drone data has been captured during flight.
M210 V2/M210 RTK V2 supports the OSDK, PSDK and MSDK. M200 V2 supports PSDK and MSDK.
Please contact [email protected]
You can connect the drones to a PC and run the upgrade using DJI Assistant 2 For Matrice, or connect LTE USB modem to the remote controller to upgrade.
Currently supports DJI Pilot. Support for GS Pro is coming soon.